MO12000 4" RO system (EN)

Esame atviri kainų pasiūlymams

Jūsų pasiūlymas išsiųstas.

Your Offer is accepted, please check your inbox.

  • Use dot instead of comma
  •     *Privalomi laukai

Kraunama

Kiekis

PARAMETERS

Flow capacity 500 L/h

Inlet water pressure 2..4 bar

Maximum TDS 3000 mg/L

Influent flow demand (service) 650–800 L/h

Operating pressure 8..12 bar

Power consumption 0.7 kW

PREKĖS ŽENKLAS:
MO12000 4" RO system (EN), KAINA BE PVM: 3572.727273, KODAS: MO12000TP5 | 001
MO12000TP5

KEY FEATURES

  • Ecosoft controller OC5000
  • Easy to use thanks to smart architecture
  • Universal system construction allows connecting options of permeate flushing and raw water blending
  • Grundfos worldwide guaranty
  • CE marked and confirmed to be safe in accordance with EC New Approach Directives

SIZE AND WEIGHT

МО12000 4"

Dimensions, H×W×D: 1450×540×385 mm

Filter weight 70 kg

SPECIFICATION

Equipment

  • Grundfos® CM 1-10 pump
  • 300 psi membrane vessels
  • BB10 sediment prefilter
  • Electrical panel with Ecosoft controller
  • Danfoss solenoid valves
  • Piping, instrumentation
  • Steel frame
  • Carton crate

Options

  • Filmtec™ ХLE-4040 / LCLE-4040 or Ecosoft ELP-4040 membrane
  • Dosing pump for antiscalant
  • Versatile set for raw water blending (30...240 L/h) or permeate flushing

Connections:

  • influent water — ½"
  • permeate — ½"
  • concentrate — ½"
  • antiscalant dosing port - ½″
  • permeate flushing input port - ½″

Specifications  

  • Permeate capacity* — 500 L/h
  • Permeate recovery** — 75%
  • Maximum TDS — 3000 mg/L
  • Influent flow demand
    - 650…800 L/h (service)
    - 1500…2000 L/h (rinse)
  • Operation pressure — 8…12 bar
  • Maximum pressure — 14 bar
  • Electrical requirements — 230 V, 50 Hz (1 ph)
  • Electrical power — 0.7 kW
  • Prefilter rating — 5 μm

* depends on feed water TDS, temperature, and permeate recovery

**  for low scaling/fouling water

Feed water requirements 

  • Influent water temperature — +5...+40 °С
  • Residual chlorine, max — 0.1 mg/L
  • Hardness — up to 3 meq/L (150 mg/L CaCO₃)
  • Iron — up to 0.1 mg/L
  • Manganese — up to 0.05 mg/L
  • Silicate — up to 20 mg/L
  • Chemical oxygen demand, max  — 4.0 mg О₂/L
  • Hydrogen sulfide - none

The limitations may be exceeded if using antiscalant, oxygen scavenger, or other RO chemical pretreatment.    

OC5000 controller

The OC5000 controller is designed for automatic or manual control of reverse osmosis unit and provides:

  • automatic switching on and off of the equipment upon signal;
  • emergency shutdown of the equipment by signals from dry-running sensors, overpressure in the module;
  • shutdown of equipment on the external STOP signal;
  • hydraulic flushing of membranes;
  • permanent quality control (electrical conductivity and temperature) of permeate.
MO12000TP5