P’URE AquaCalcium Mint reverse osmosis filter with pump on metal rack (EN)
PARAMETERS
Flow capacity 12 L/h
Recovery 50 %
TDS (mineralized water) 55-65 mg/L
Inlet water pressure 2-5 bar
TDS (inlet water) 1500 mg/L
Electrical requirement 230 V, 50 Hz
KEY FEATURES
- AquaCalcium mineralizer enriches treated water with calcium
- Replicates the natural conditions of water percolation through mountain rocks
- Provides stable content of minerals in the purified water — 55–65 mg/L
- AquaGreen technology is economical and environmentally-friendly (recovery rate 50%)
- Maintenance-friendly due to self-standing metal rack
- Designed for water systems with low pressure
SIZE AND WEIGHT
Dimensions, H×W×D: 485×413×195 mm
Filter weight 11,95 kg
SPECIFICATION
System components
- Filter housing with pump on metal rack
- Ecosoft pack of pre-filters for reverse osmosis filter
- Membrane element 75 GPD (280 LPD)
- Ecosoft carbon post-filter for reverse osmosis filter
- AquaCalcium mineralization filter
- "Modern" ball valve faucet for purified water
- Plastic pressure tank (total vol. 12 L/3.2 gal, usable vol. up to 7 L/1.8 gal) and tank valve
- Feed water adapter, feed valve, drain saddle
- Pack of color tubes (4 pcs) for convenient filter installation
- Service wrenches
- User manual
Quality of mineralized water*
- pH 7-7.5
- Total mineral content - 55-65** mg/L
- Calcium - 10-15 mg/L
- Magnesium <1 mg/L
- Sodium + potassium <5 mg/L
- Hydrocarbonates — 30-50 mg/L
- Chlorides <5 mg/L
* The indicators are determined under the following conditions: inlet water temperature is 20 °С, outlet water composition and filter operation parameters correspond to the recommended by the manufacturer, water consumption intensity is appropriate for a family of three. When the inlet water temperature decreases in winter, the mineral content in the treated water may be lower, and when the temperature increases in summer, it may be higher.
** After one hour or more standing time, the mineral concentration in the first glass of water may exceed the stated value
Source water requirements
- pH = 6.5–8.5
- Total dissolved solids ≤ 1500 mg/L
- Hardness ≤ 10.0 meq/L (<500 mg/L CaCO₃)
- Chlorine ≤ 0.5 mg/L
- Total iron ≤ 0.3 mg/L
- Manganese ≤ 0.1 mg/L
- Chemical oxygen demand ≤ 5 mg O₂/L
- Total microbial count (TMC) ≤ 50 CFU/100 ml
- Coliform index ≤ 3